EquipTech - Equipment

|

| | | | | |

Select a Category:

218 items found.

	AccuSystems Vertical CNC Scoring Machine
	Model: AccuScore AS-200-J	view details » get a quote »
	S/N: 95350009
	-jump score capable -Windows based operating system -thin panel capability

	Aldonex Ultimat-Ic DC Power Supply
	Model: T-412-3CR-CCV	view details » get a quote »
	S/N: 2023876
	Input: 440-480 VAC 3Phase 5.8 amps Output: 300 Amps @ 0-12 Volts DC This item is used. Shipping Dimensions: 43"X18"X31"

	Aldonex Ultimat-Ic DC Power Supply
	Model: T-412-3CR-CCV	view details » get a quote »
	S/N: 2026805
	Input: 440-480 VAC 3Phase 6 amps Output: 300 Amps @ 0-12 Volts DC This item is used. Shipping Dimensions: 36"X18"X31"

	Aldonex Ultimat-Ic DC Power Supply
	Model: T-412-2.5CR-CCV	view details » get a quote »
	S/N: 2026662
	Input: 440-480 VAC 3Phase 5 amps Output: 250 Amps @ 0-12 Volts DC This item is used. Shipping Dimensions: 36"X18"X31"

	Aldonex Ultimat-ic DC power supply / rectifier
	Model: T-412-3CR-CCV	view details » get a quote »
	S/N:
	Input: 440-480 VAC 3Phase 6 amps Output: 300 Amps @ 0-12 Volts DC This item is used. S/N 2026804 Shipping Dimensions: 34"X18"X31"

	Aldonex Ultimat-Ic DC Power Supply / Rectifier:
	Model: T-412-2.5CR-CCV	view details » get a quote »
	S/N: 2023878
	Input: 440-480 VAC 3Phase 4.8 amps Output: 250 Amps @ 0-12 Volts DC This item is used. Shipping Dimensions: 42"X18"X31"

	Alpha Metals
	Model: Omegameter 600 SMD	view details » get a quote »
	S/N:
	24"x24" Test Cell, Operable and Ready to Ship!

	Alpha Metals Ionograph
	Model: 500M SMD II	view details » get a quote »
	S/N:
	With: - PC controls - Keyboard - Monitor - HP printer 115 Volt

	Alpha Metals Ionograph
	Model: 500M SMD II	view details » get a quote »
	S/N:
	With: - PC controls - Keyboard - Monitor - HP Printer 115 Volt

	Amtech
	Model: Loader/Unloaders	view details » get a quote »
	S/N:
	w/50 Station Accumulators and Feed Conveyor, 15 Available

	Amtech Accumulator
	Model: 100 Station	view details » get a quote »
	S/N:

	APS Plasma Etch
	Model:	view details » get a quote »
	S/N:
	With PE 10k power supply 4 gas unit Stokes 7.5 hp vacuum pump New controls

	Argus
	Model: Pre-Cleaner	view details » get a quote »
	S/N:
	20'' Pre Cleaner Machines- Rinser, Dryer

	Argus International IR Tack Dry Cure Oven
	Model: 9624	view details » get a quote »
	S/N: 1001447
	- 3-Zone - Extended Conveyor - (2001) - 480V / 3Ph / 75Amps

	Argus Leveler
	Model: 5124	view details » get a quote »
	S/N:
	New Air Knives, Center Hoist, also available lead free

	Argus LPI Spray Coater
	Model: 9324	view details » get a quote »
	S/N:
	with tack dry oven, (1999) Rebuilt and installed

	Argus UV
	Model: 7125	view details » get a quote »
	S/N:
	Single-sided exposure unit, 24" belt, 2 bulb unit

	ASI LPI Developer
	Model: 9025	view details » get a quote »
	S/N:
	24’’ with Cascade Rinses, Ready to ship! $9,500 The economical 9025 System combines full wet processing abilities with maximum space savings.

	ATG Flying Probe Tester
	Model: A3	view details » get a quote »
	S/N: 001000A3061
	8-Probes, (4) Upper, (4) Lower (2005)

	ATG Flying Probe Tester
	Model: A2	view details » get a quote »
	S/N: 97 04 00A2 150
	16 probe tester

	Atotech Fluid Head Clean Line
	Model: 547XL-30"	view details » get a quote »
	S/N:
	Includes the following modules: Input, Main Chamber, Rinse, Micro Etch, Rinse, Fluid Head Dryer & Exit

	Automatech Exposure Unit
	Model: AFOSAie-CA5	view details » get a quote »
	S/N:
	Year MFG: 2006 Automatic alignment 4 Camera System

	Avalon Hot Air Leveler
	Model: Avtec 2000	view details » get a quote »
	S/N:
	Excellent Condition, (1998)

	Barnaby Scoring Machine
	Model: ScoreMaster 505	view details » get a quote »
	S/N:
	Manual, Panel Capacity 24" x 24"

	Barnaby Scoring Machine
	Model: ScoreMaster 506	view details » get a quote »
	S/N: 160
	Barnaby Model 506 ScoreMaster scoring machine with digital readout. s/n 160. 110 volt /1 phase

	Barnaby Stackmaster
	Model: 802E	view details » get a quote »
	S/N:
	Driller/Pinner

	C-Sun Bake Oven
	Model:	view details » get a quote »
	S/N:
	Double door, all stainless steel

	C.A. Picard Depinner
	Model:	view details » get a quote »
	S/N:
	Hydraulic Operation, Excellent Condition, Ready to Ship

	CA Picard Film Punch
	Model: XPF 3058SA01	view details » get a quote »
	S/N: 25334-000
	Mfg. 2001 many film sizes

	CA Picard Post Etch Punch
	Model: XPF-3043	view details » get a quote »
	S/N: XPF-3043-02
	Date of mfg.: 5/99; Punches film or cores of 20 x 26, 23 x 28, 26 x 30, 26 x 32; includes 2 cameras

	Camtek AOI
	Model: 2V50AR	view details » get a quote »
	S/N: 539
	Mfg. 1998, 3 others available,

	Camtek AOI
	Model: Orion 604 WR	view details » get a quote »
	S/N: 2410
	(2000) Call for details!, upgraded

	Cemco Horizontal Solder Level Plant
	Model: CASL	view details » get a quote »
	S/N:
	Leveller type B consisting: pre heat blower, pre heat oven (200ºC) 45º converter table, solder pot (inclusive of flux and oil applicator) 45º hover table, double wash unit, dryer module and conveyor to unloading station, levelling speed 1.0 to 24m/min with Abbott air receiver

	Cemco Hot Air Leveling
	Model: Quicksilver sm	view details » get a quote »
	S/N:
	Tin/Lead (1998) Max. Panel Size: Standard 2-pin fixturing 610 x 610 mm (24" x 24") Optional 610 x 762 mm (24" x 30"), tooling punch available also

	Cemco Vertical Hot Air Leveling System
	Model: Quicksilver	view details » get a quote »
	S/N:
	Max. Panel Size: Standard 2-pin fixturing 610 x 610 mm (24" x 24") Optional 610 x 762 mm (24" x 30"), tooling punch available also

	Cemco/FSL Silver Line
	Model:	view details » get a quote »
	S/N: 8243 to 8255
	1.0 to 3.0 mpm Silver Line, Low Hours. 65 Amps, 480VAC, 3 phase, 60 Hz power Call for more information.

	Century Pumice Scrubber
	Model:	view details » get a quote »
	S/N:
	24", High Pressure Rinse, Heated Dryer, Filtering System for Inner & Outer Layer

	Chemcut Alternative Oxide Line
	Model: 547XLi-30"	view details » get a quote »
	S/N:
	Module configuration: -Input -QRSM -quad rinse module w/ chem chamber -QRM- quad rinse module -DSM/LRSM- double spray module w/ large sump (Bond Film Activator) Bond Film Part A Bond Film Part B QRSM DSM/LRSM -Inspection -WAM- warm air module -Exit

	Chemcut Clean Line
	Model: 547XLi-30"	view details » get a quote »
	S/N:
	With the following modules: Input, Main Chamber, Rinse, Micro, Rinse, Fluid Head Dryer & Exit

	Chemcut Clean Line
	Model: 547XLi-30"	view details » get a quote »
	S/N:
	Consisting of the following modules: ICDM: Input conveyor drive; TRSM: Large process Micro etch or conditioner heated and cooled; DSM/RSM: Double recirculating rinse; AKM: Fluid head dryer; OCM: Exit. 208 / 240 or 480 volt customer choice.

	Chemcut Deburrer
	Model: 604	view details » get a quote »
	S/N:
	2 brushes w/rinse and dryer, 24'' Capacity. Dimensions: • Length 90 in (2286 mm) • Width 52 in (1320 mm) • Height 49 in (1245 mm) • Dry Weight 1780 lbs. (808 kg) Crated: 2470 lbs. (1121 kg Panel Size • Thick: min 0.015 in (0.38 mm), to max 0.250 in. (6.35 m)

	Chemcut Deburrer
	Model: 605	view details » get a quote »
	S/N:
	24" Double Sided Deburrer- 2 Top Brushes, 2 Bottom Brushes with Oscillation & High Pressure Rinse System Dimensions: Model 605 • 108 in (2743 mm) • 52 in (1320 mm) • 49 in (1245 mm) • 38.5 in (978 mm) Systems Weight: • Dry Weight 2650 lbs. (1203 kg) • Shipping Weight skidded: 3350 lbs. (1521 kg) Crated: 3650 lbs. (1657 kg) • Thick: min 0.015 in (0.38 mm), to max 0.250 in. (6.35 m

	Chemcut Develop Line
	Model: 547XL-30"	view details » get a quote »
	S/N:
	Includes the following modules: Input, Main Chamber, Rinse Recirculating, Rinse, Fluid Head Dryer & Exit

	Chemcut Develop Line
	Model: 547-30"	view details » get a quote »
	S/N:
	Includes the following modules: Input, Main Chamber, Rinse Recirculating, Rinse, Fluid Head Dryer & Exit

	Chemcut Develop Line
	Model: 547XL-20"	view details » get a quote »
	S/N:
	Includes the following modules: Input, Main Chamber, Water Rinse & Exit

	Chemcut Develop Line
	Model: 547XLi-30"	view details » get a quote »
	S/N:
	Includes cascade rinse & fluid head dryer

	Chemcut Develop/Etch/Strip Line
	Model: 547XLi-30"	view details » get a quote »
	S/N:
	Like new condition!

	Chemcut Etching System
	Model: 547-30"	view details » get a quote »
	S/N:
	Includes the following modules: Input, Main Chamber, Flood Rinse, Rinse Recirculating, Rinse, Dryer & Exit

	Chemcut Etching System
	Model: 547XL-30"	view details » get a quote »
	S/N:
	Includes the following modules: Input, Main Chamber, Flood Rinse, Water Rinse Recirculating, Water Rinse, Dryer & Exit

	Chemcut Ferric Etching System
	Model: 547XL-30"	view details » get a quote »
	S/N:
	Includes the following modules: Input, Main Chamber, Quad Rinse Cascade, Dryer & Exit

	Chemcut LPI/Primary Dry Film Developer
	Model: Sigma Series	view details » get a quote »
	S/N:
	Chemcut Sigma Series LPI Developer or Primary Dry Film Developer with this core handling system. Input, Main Chamber, Single Rinse Recirculating, Single Rinse Cascade, Fluid Head Dryer and Exit . Let us rebuild to your requirement. High pressure pumps for LPI etc. Fully Rebuilt with 120 Days Parts & Labor Warranty. Installion included in USA only.

	Chemcut Preclean Line
	Model: 547XL-30"	view details » get a quote »
	S/N:
	With the following configuration: Input , main chamber, single rinse recirculating, single rinse cascade, fluid head dryer and exit. Teflon heaters and cooling coil

	Chemcut Preclean Line
	Model: 547XL-30"	view details » get a quote »
	S/N:
	Includes the following modules: Input, 48" Main Chamber, Single Rinse Recirculating, Single Rinse, Fluid Head Dryer & Exit

	Chemcut Preclean Line
	Model: 547XL-30"	view details » get a quote »
	S/N:
	with the following modules: Input, 48" Main Chamber, Single Rinse Recirculating, Single Rinse, Fluid Head Dryer & Exit

	Chemcut Resist Stripper
	Model: 547XL-30"	view details » get a quote »
	S/N:
	Chemcut 547XL-30" Double Chamber Resist Stripper with the following configuration: Input, double main chamber, single rinse with sump, single rinse cascade, fluid head dryer and exit. Includes filter system Rebuilt with 120 day parts and labor Warranty , 220 Volt or 480 Volt

	Chemcut Scrubber/Rinser/Dryer
	Model: 107	view details » get a quote »
	S/N:
	24" Double Sided

	Chemcut Scrubber/Rinser/Dryer
	Model: 107I	view details » get a quote »
	S/N:
	24" Double Sided

	Chemcut Stripper
	Model: 547XLi-30"	view details » get a quote »
	S/N:
	Includes the following modules: Input, Main Chamber, Rinse Recirculating, Rinse, Fluid Head Dryer with Barrel Filter System

	Chemcut Tin Stripper
	Model: 547XL-30"	view details » get a quote »
	S/N:
	Chemcut 547XL-30" Tin Striper with the following: Input, Main Chamber with 6 spray bays, top and bottom, & all plastic parts, Single Rinse Recirculating, Single Rinse Cascade, Fluid Head Dryer & Exit. Fully Rebuilt with 120 Days Parts & Labor Warranty

	Chemring Reverse Pulse Plate Rectifiers
	Model: CPS 2400D	view details » get a quote »
	S/N:
	8-Chemring Reverse Pulse Plate Rectifiers Model CPS 2400D Input: 415 v Output each rectifier: 5v and 2 x 400amp forward and 1 x 2500amp reverse Includes master control panel w/ PC controller Water cooled Year: 1996

	Circuit Automation
	Model: TC 120 Conveyorized Oven	view details » get a quote »
	S/N:
	- Tack-Dry throughout - 130 panels/hour - 30 min. cycle, panels on 1.5" centers - 60 min. cycle, panels on 0.75" centers - Maximum operating temperature = 400 F

	Circuit Automation LPI Screener
	Model: DP2500	view details » get a quote »
	S/N:
	200 Hours of runtime. 3 years old. Barely used.

	Circuit Automation LPI Screener
	Model: 1500 2X	view details » get a quote »
	S/N:
	Double Sided, to be fully rebuilt, swing out arms, gold screening heads

	Circuit Automation LPI Screener
	Model: DP10	view details » get a quote »
	S/N:
	Double Sided

	Circuit Automation LPI Screener
	Model: DP-1000	view details » get a quote »
	S/N:
	(1997) with Screen Frames and Operations Manual

	Circuit Automation LPI Screener
	Model: DP1500-2X	view details » get a quote »
	S/N:
	Rebuilt with 100 day warranty SPECIFICATIONS: Min Panel Dimension 8" x 12" Max Size 24" x 30" Min Thickness 0.010" Max Thickness 0.250" Frame Size 37" x 46.6" Print Speed 1.0 to 10" Electrical Service 110V/15AMP Flood Speed 1.0 to 10" inch/sec

	Colight Exposure Unit
	Model: 1330	view details » get a quote »
	S/N:
	5kw, double drawer, air cooled

	Colight Exposure Unit
	Model: DMVL-1530	view details » get a quote »
	S/N: 74032600
	5kw, Double Drawer, w/Air Conditioner Unit, Set up With CA Picard Pin Lam System, Serial # 74032600

	Colight Exposure Unit
	Model: DMVL-1630 8 kW	view details » get a quote »
	S/N: units are 1997
	Double drawer exposure units. 2 available, rebuilt and ready to ship today! Act now and get free shipping anywhere in the USA. Full 90 day warranty

	Corema
	Model: 100 Station Accumulator	view details » get a quote »
	S/N:

	Corema
	Model: 90˚ Turn	view details » get a quote »
	S/N:

	Driller/Pinner
	Model:	view details » get a quote »
	S/N:
	-pneumatic controls -2 vertical heads -horizontal panels alignment -bowl feed pins

	DuPont Hot Roll Laminator
	Model: HRL-24	view details » get a quote »
	S/N:
	24'' laminator with LC 2400 cleaner unit. We have DuPont temperature control boards in stock and ready to ship. Call for prices and/or exchange program.

	Dynachem
	Model: Diazo Developer	view details » get a quote »
	S/N:
	24"

	Dynachem 360 Hot Roll Laminator
	Model: 360	view details » get a quote »
	S/N:
	Model 360 hot roll laminator to be fully rebuilt.

	Dynachem Auto Cut Sheet Laminator
	Model: 1600-D	view details » get a quote »
	S/N: 06203208
	Load/Unload, Auto Centering, Allen Bradley PLC Controller, 30'' Capacity, (1999)

	Dynachem Laminator
	Model: 1600 IV 30	view details » get a quote »
	S/N:
	Automatic, Thin Panel Option (1998)

	Dynachem Preheater
	Model: 800	view details » get a quote »
	S/N:

	Dynachem Vacuum Laminator
	Model: 724	view details » get a quote »
	S/N:
	Rebuilt Vacuum Pump and New Seals

	Dynamotion Drill
	Model: Smart Drill	view details » get a quote »
	S/N: M103
	1- 125k Air Bearing Spindle, Sieb & Meyer Controller, BBD's & TMS, 2 available

	Eidschun ASI Developer
	Model: Ninety 25	view details » get a quote »
	S/N:
	24" Develop Line with the following modules: Input, Main Chamber, Double Rinse, Dryer & Exit

	Eidschun Electroless Line
	Model:	view details » get a quote »
	S/N:
	Automatic with flash plate, 36‘ long with rail rider hoist system. Call for specs and details

	Elite Table Top Hand Screen Table
	Model:	view details » get a quote »
	S/N:
	with X-Y Adjustments, Back Lighting

	ESI Accumulator
	Model: 100 Station	view details » get a quote »
	S/N:

	ESI UV Yag Laser
	Model: 5330	view details » get a quote »
	S/N:
	We are the exclusive rebuilder of ESI laser systems. Each drill will be factory certified with updated software included. All models in stock 5100, 5200, 5330. Let us quote your requirements.

	Everett Charles Bare Board Tester
	Model: 9090	view details » get a quote »
	S/N: T-9090-187
	Double Sided, (1999), Grid Size: 10" x 19" , Touch Screen Controls & Maintenance Cart, full diagnostic check prior to shipping

	Excellon
	Model: Concept Drill	view details » get a quote »
	S/N:
	Year MFG: 2004 Single 120K RPM spindle Spindle model: 1473-08

	Excellon Drill
	Model: Uniline 2000	view details » get a quote »
	S/N: 4280
	Single Spindle Drilling Machine w/ 170,000 rpm Air Bearing Spindle, 120 Bits Per/Cartridge Tool Management, Refrigerated Air Dryer, Sun Sparc Workstation w/ Sun Monitor & Keyboard (1996) 230 Volts, 50/60 Hz., 20 Amps, Single Phase

	Excellon Driller
	Model: EX 200	view details » get a quote »
	S/N:
	2 Heads, 80k Bearing Spindles, 9 Tool Changers per Station, CNC 6 Controller

	Excellon Driller
	Model: EX 200	view details » get a quote »
	S/N:
	2 Heads, Air Bearing Spindles, 9 Tool Changers per Station,CNC 6 Controller

	Excellon Driller
	Model: EX 300	view details » get a quote »
	S/N:
	3 Heads, 80k Bearing Spindles, 9 Tool Changers per Station, CNC 6 Controller

	Excellon Driller
	Model: Mark VI-E	view details » get a quote »
	S/N:
	TMS, BBD's, 110K RPM Westwind Spindles, 4 Head, CNC-6 Controller

	Excellon Driller
	Model: Mark VI-C	view details » get a quote »
	S/N:
	CNC-6 Controller, 4 Head, Large Tool Management System, BBD's

	Excellon Driller/Router
	Model: EX 110 D/R	view details » get a quote »
	S/N:
	1- 80k rpm Air Bearing Spindle, 10 Tool Pods, CNC-6 Controller,

	Excellon Driller/Router
	Model: EX 300	view details » get a quote »
	S/N: 090
	4 Heads, 420 Spindles-40K, CNC-6 Controller

	Excellon Driller/Router
	Model: Uniline	view details » get a quote »
	S/N:
	Sun controller, TMS of 120 bits, 80k RPM Model ABWR spindle, 11/98

	Excellon Driller/Router
	Model: Mark VI-C	view details » get a quote »
	S/N:
	CNC-6 Controller, 5-Head, 420 Spindles

	Filotec Jump Score Unit
	Model: KSM 30	view details » get a quote »
	S/N:
	With Sieb & Meyer controller (1999)

	First EIE Legend Printer
	Model: CP-400	view details » get a quote »
	S/N: 1005
	Year Mfg.: 3-2003

	Gerber Laser Photoplotter
	Model: Crescent 40	view details » get a quote »
	S/N:
	- available w/ upgraded front end station - drum style

	Glenbrook Real-time X-ray Inspection
	Model: RTX-113	view details » get a quote »
	S/N: A0403-986S
	year 2004, ready to ship

	Grieve Solder Mask Oven
	Model: 333	view details » get a quote »
	S/N:
	0 -250˚ F with 2 shelves

	Grieve Solder Mask Oven
	Model: 343	view details » get a quote »
	S/N:
	0-350˚ F with 2 shelves

	Hakuto Auto Cutsheet Laminator
	Model: Mach 610i	view details » get a quote »
	S/N:

	Hakuto Cut Sheet Laminator
	Model: Mach 500	view details » get a quote »
	S/N:
	18" Automatic Cut Sheet Laminator- Auto Centering

	Hakuto Cut Sheet Laminator
	Model: Mach 600	view details » get a quote »
	S/N:
	24'' Automatic Cut Sheet Laminator- Auto Centering

	Halco Horizontal Hot Air Leveler
	Model: 175	view details » get a quote »
	S/N:
	24" With Fluxer & Cool down station

	Halco Lead Free Hot Air Leveler
	Model: 175	view details » get a quote »
	S/N:
	Horizontal HAL Machine

	HBS Electroless Line
	Model:	view details » get a quote »
	S/N:
	57' long, low Ryder hoist system

	Hitachi CO2 Laser Driller
	Model: LCO-1A21E/10C	view details » get a quote »
	S/N: K810548006
	Auto Load & Unload s/n: K810548006 (1998) Air: Water Cooled

	Hitachi Laser Direct Imaging System
	Model: DE-7AFE	view details » get a quote »
	S/N: H370044003
	(2006) w/ Associated Computer & Microprocessor Controls, Eizo Flat Screen Monitor, Keyboard, Mouse, Apiste Conditioning/Filtration Unit, (2) Daikin Industries Model AKZW358-A192A Chilling Units

	Hitech Exposure Unit
	Model: 102	view details » get a quote »
	S/N:
	5kw, Double Drawer with Mylar frames, Built in Water Cooling

	Hitech Exposure Unit
	Model: 106L	view details » get a quote »
	S/N:
	8kw, Double Drawer, Built in Water Cooling, Large Format 43"x 55" Frame Size

	Hoffman
	Model: 30 hp Vacuum System	view details » get a quote »
	S/N:

	Hollmuller
	Model: DES Line	view details » get a quote »
	S/N:
	- Inner layer, cupric etch - Minimum panel thickness: 0.05mm - Maximum line speed: 4m/min @ 17 micron Cu - Auto dosing - Pressure and flow control - Make up units with closed loop recovery including:control cabinets and associated 30m long - 24K hours - Right to left - This is set up for European voltage. We can supply an line configuration, installed at your facility!

	Hollmuller AlphaLevel
	Model: Immersion Silver Line	view details » get a quote »
	S/N:
	An immersion process carried out by the displacement reaction between Cu & Ag. It deposits a thin layer of Ag on the exposed Cu area of a PWB, which provides excellent protection to the Cu surface for solderability. On the other hand, organic will co-deposit with the Ag during reaction. It protects the Ag layer from oxidation & sulphide attack & makes the Ag protective layer durable. Moreover, with its smooth surface topography, it reduces the shorts & placement defects in assembly processes.

	Hyoki Scubber
	Model: Jet Pumice	view details » get a quote »
	S/N:
	2 Pump system with rinse and dryer

	I.S.
	Model: Ammonia Etching System	view details » get a quote »
	S/N:
	24" with flood rinse, triple cascade rinse & dryer, (2001)

	I.S.
	Model: Devmaster 30"	view details » get a quote »
	S/N:
	Double Chamber with the following modules: Input, Double Develop Chamber, Quad Rinse Cascade, Dryer & Exit

	I.S.
	Model: Devmaster 24"	view details » get a quote »
	S/N:
	Includes the following modules: Input, Main Develop Chamber, Quad Rinse Cascade, Dryer & Exit

	I.S.
	Model: Stripmaster	view details » get a quote »
	S/N:
	30", Double Chamber with Drum Filter System and the following modules: Input, Double Strip, Cascade Rinses, Dryer & Exit. (1997)

	I.S. Acid Cleaner
	Model: Pumiflex	view details » get a quote »
	S/N:
	Thick Panel Option, SHD Dryer, Filtrex 2000 Filter System, (1996). System Has Less Than 300 Hours! Call for more details!

	I.S. Pumice Scrubber
	Model: Pumex	view details » get a quote »
	S/N:
	High Pressure Rinse, SHD Dryer, Thick Panel Option, Filtrex 2000, (1998)

	I.S. Scrubber
	Model: Pumiflex Series 2000	view details » get a quote »
	S/N:
	24'' Conveyor with High Pressure Rinse, Filtrex 2000 (1996) for Inner & Outer Layer

	I.S. Scrubber
	Model: 24'' PUMEX	view details » get a quote »
	S/N:
	High Pressure Rinse, SHD Dryer, Set up for Aluminum Oxide or Pumice, Filtrex 2000 Filter System Included. Ready to Ship!!

	I.S. Scrubber/Rinser/Dryer
	Model: Scrubbex	view details » get a quote »
	S/N:
	24 " Double Scrub Complete with with rinse ,dryer and filtering System (1998)

	I.S. Scrubbing / Debur Machine
	Model: Scrubbex 2000	view details » get a quote »
	S/N: 0932137
	4-Brush Deburr w/ Ultrasonics, Siemens Digital Controls, Serial No. 0932137 Including Three Phase Transformer 277/480 Volts

	I.S. Scrubbing/Debur Machine
	Model: Scrubbex 2000	view details » get a quote »
	S/N: 0932137
	4-Brush Deburr w/ Ultrasonics, Siemens Digital Controls, Serial No. 0932137 Including Three Phase Transformer 277/480 Volts

	I.S. Soldermask Developer
	Model: Devmaster	view details » get a quote »
	S/N:
	- 24" - Includes rinses - Includes SHD dryer

	Incal 2-Opening Press
	Model:	view details » get a quote »
	S/N:
	24’’ x 24’’ vacuum press with no cooling, heat only, 220 volt. Small footprint. Great press for prototype flex

	Inner Layer Trays
	Model:	view details » get a quote »
	S/N:
	- Over 500 available - Sold in lots of 50 - Inside dimensions 26" x 29" x 3" deep

	Inner Layer Trays
	Model:	view details » get a quote »
	S/N:
	- Over 500 available, - Sold in lots of 50 - Inside dimensions 26" x 29" x 3" deep

	Ishii Hyoki Scrubber
	Model: Aluminum Oxide	view details » get a quote »
	S/N:
	Includes preclean, jet scrub, high pressure rinse and dryer, fully rebuilt, (2000)

	Kepro
	Model: BTE-402	view details » get a quote »
	S/N:
	bench top etcher, vertical etcher. Great for lab or prototype use.

	Kuttler Loader
	Model: RL160	view details » get a quote »
	S/N: 3463
	Year 5/2004, 480V

	Kuttler Loader
	Model: KEA60	view details » get a quote »
	S/N:

	Kuttler Loaders
	Model: RLE-102A	view details » get a quote »
	S/N: 2475 & 2477
	(2000), s/n 2475 & 2477

	Lantronic Hot Air Leveler
	Model: TT30	view details » get a quote »
	S/N:
	30" x 30" panels, Pb-free

	Lauffer Laminating Press System
	Model: SL80-2 Fast Cycle	view details » get a quote »
	S/N: 18262
	w/ Control Cabinet. - A rare opportunity to purchase the latest technology!

	MacDonald Dettwiler Photoplotter
	Model: Fire 9350	view details » get a quote »
	S/N:
	.25 mil resolution, (1999)

	Maintech Cut Sheet Laminator
	Model: 2000	view details » get a quote »
	S/N: 080
	Maintech Automatic Dry Film Cut-Sheet Laminator Model 2000 - Equipped w/ Maintech Model THP-24 Pre-Heater, s/n 080, Windows 98 Based Controls, Fully automatic (2000)

	Maintech Preheater
	Model: 006	view details » get a quote »
	S/N:
	6 heated rolls, 3 independant heater controls, 29'' rollers, 200 volt, 3 phase (1997)

	Mania Barco Bare Board Tester
	Model: Precise 2S	view details » get a quote »
	S/N: 2BB017
	With associated controls Grid size 16-19 top and bottom

	Mania Cube Tester
	Model: Model 3864HV	view details » get a quote »
	S/N:
	Single Sided, 40 Volts, 10 x 18 Grid Size

	Mania Flying Probe
	Model: Speedy Model MPP-4504	view details » get a quote »
	S/N: 550389
	4 probe with Hi-Ram software and calibration plate, (2000)

	Mania Tower Tester
	Model: MPP4048/24	view details » get a quote »
	S/N: 48145293
	Double Sided, Double Density, Full Net Test Capabilities, Expandable Grid, Grid Sizes: 19.125'' x 16'' single density top & bottom; 9.5'' x 16'' double density top & bottom.

	Marseco Deburrer
	Model: HDDBS-2-30	view details » get a quote »
	S/N: 045012
	2 brushes w/ High Pressure Rinse and Filter (1999) Process parts 2"-24" in width, and 6" or longer in length. Process parts 0.01" to 0.25" in thickness. 0.004" to 0.25" thickness

	Marseco Deburrer
	Model: WDB2-24	view details » get a quote »
	S/N:
	24", Double Sided, High Pressure Rinse & Dryer

	Marseco Deburrer
	Model: 24"	view details » get a quote »
	S/N:
	Includes filter system and high pressure rinse. This scrubbing deburrer machine is rebuilt and ready to ship.

	Marseco Scrubber/Rinser/Dryer
	Model: WSS2-24	view details » get a quote »
	S/N:
	24'' Double Sided with 2 brushes and rinse with dryer Process parts 2"-24" in width, and 6" or longer in length. Process parts 0.01" to 0.25" in thickness. 0.004" to 0.25" thickness

	Micro VU X-Y-Z Measuring Machine
	Model: M24X18	view details » get a quote »
	S/N: 4443
	With Video - Price $ 9,500. Features: Extra Large Travel 24" x 18" 36" x 24" 6" Z Travel Standard 12" Z Travel Available Manual Zoom Lens Profile and Surface Lighting System Linear Way Bearing Design Optional Stepper Motor Control Optional InSpec Metrology Software

	Microcraft Flying Probe Tester
	Model: EMMA ELX6146	view details » get a quote »
	S/N:

	Morton Dynachem Hot Roll Laminator
	Model: 300	view details » get a quote »
	S/N:
	Includes Model 310 Vacuum Base, 24" Conveyor

	Morton Tacky Roller Machine
	Model: Hi-Tac Cleaner-24	view details » get a quote »
	S/N:

	Multiline Artwork Punch
	Model:	view details » get a quote »
	S/N: SAP-001
	Semi-automatic

	Multiline Auto Artwork Punches
	Model:	view details » get a quote »
	S/N: AAP-0060, AAP-0063
	Series 3000 Controller

	Multiline Core Punch
	Model: Acculine	view details » get a quote »
	S/N:
	24"x24" Format, Standard .187 Offset

	Multiline Post Etch Punch
	Model:	view details » get a quote »
	S/N:
	With 3000 controller Runs on DOS .188 standard offset configuration

	Multiline Post Image Artwork Punch
	Model:	view details » get a quote »
	S/N:
	With: -2 Panasonic Vision Systems -Fiber-Lite Optic Light Sources -Panasonic Monitors

	Multiline Semi-automatic Artwork Punch
	Model:	view details » get a quote »
	S/N:
	Standard .188 offset

	Nuarc
	Model: Vacuum Frames	view details » get a quote »
	S/N:
	30"x40"- Vacuum Pump

	NuArc Platemaker
	Model: FT40APRNS	view details » get a quote »
	S/N:
	Double-sided with digital controls

	Nuarc Vacuum Frame
	Model: VF-DP	view details » get a quote »
	S/N:
	50'' x 62'', (1996)

	Nubal Accumulator
	Model: 50 Station	view details » get a quote »
	S/N:
	24’’

	OEM Vacuum Press 1997
	Model: 8-Opening	view details » get a quote »
	S/N:
	1997 OEM Model 140-400TF Mass Flow Hot Oil Lamination 8-Opening Vacuum Press, s/n 206-A, w/ Model 140-400TF 8-Opening Cold Press, s/n 206-B, withTransfer Station, Bosch Vacuum Pump w/ American Hydrothermal Corp. Model 1.0.2/2-S-S6-160, s/n AM2361 (1997)Marathon 10 hp Electric Motor, Dean Model RA-3000 Pump, Applicable Manuals and Software, Platen Size 26'' x 32'', (8) Opening with Load and Unload our price $85k including loading. note: low profile

	OEM Electric Vacuum Press
	Model: 6 Opening	view details » get a quote »
	S/N:
	- 6 opening - separate cool down - Auto load & unload - Year: 1999 ~ In excellent condition! ~ Can be sold fully installed

	OEM Lamination Vacuum Press
	Model: Vac-Q-Lam	view details » get a quote »
	S/N:
	6-Opening, 31" x 31" platen size, electric heat with built in water cooling, 480 volt 3 phase. Great for Flex

	OEM Press
	Model: Vac-Q-Lam 6-Opening	view details » get a quote »
	S/N:
	30" x 30" Platens, All in one

	Olec Accuprint Exposure Unit
	Model: AP-30 Super 8	view details » get a quote »
	S/N:
	8kw, Double Drawer, Built in Air Conditioning rebuilt

	Olec Accuprint Exposure Unit
	Model: AP-30-5000	view details » get a quote »
	S/N:
	5kw, Double Drawer

	OPTEK
	Model: X-Y Measuring Machine	view details » get a quote »
	S/N:

	OPTEK Vacuum Laminator
	Model: DPL 24	view details » get a quote »
	S/N:
	Drawer Type Detailed Specifications - Substrate Size Up to 24" X 24" on a standard machine.Substrate Thickness Thicknesses from .001" to .375" a maximum height of .150". Shipping Weight 2200 Lbs. Dimensions 44" Wide X 44" Deep X 60" High Utilities 220 VAC, 40 Amps/phase, 3 Phase 50/60HzDry air at 5.5 Bar (80 PSI), 142 L/m (5 CFM) Vacuum An end point in excess of 2 Torr. (30 seconds/Vacuum Dwell and 20seconds/Pressure Dwell).

	Optrotech Laser Photoplotter
	Model: Image 5008	view details » get a quote »
	S/N:

	Orbotech AOI
	Model: Blaser-AP	view details » get a quote »
	S/N:
	Vision 300 Series V-Blaser-AP AOI optical head laser scanner. No software included. Lines/spaces supported: 50-250 microns (2-10 mil) Panel Size: 31" x 40" Inspection Area: 24" x 30"

	Orbotech AOI
	Model: 1450	view details » get a quote »
	S/N:
	Includes power conditioner & control cabinet. No software included.

	Orbotech AOI
	Model: PC14 Micro	view details » get a quote »
	S/N:
	Includes Software, Ready to Ship!

	ORC Exposure Unit
	Model: HMW680GW	view details » get a quote »
	S/N:
	7kw, Double Drawer, Internal Cooling, New Bulbs, New Water Jackets and Mylar Frames.

	ORC Exposure Unit
	Model: HMW 201B	view details » get a quote »
	S/N:
	3kw, Double Drawer, Built in Water Cooling

	ORC Exposure Units
	Model: 201B	view details » get a quote »
	S/N:
	5kw, (1995) 2 Available

	Piergiacomi Target Driller
	Model:	view details » get a quote »
	S/N: 37
	Single head target driller with load and unload; Windows based controller THIS ITEM JUST SOLD FOR 25K

	Plasma Etch Plasma System
	Model: Mark 3	view details » get a quote »
	S/N:
	- 10,000 watt low frequency generator - 3 0-5000cc Mass Flow Controllers - 5 gas system

	Pluritec Driller
	Model: Single Spindle	view details » get a quote »
	S/N:
	Pluritec Single-spindle driller, auto load and unload w/ cart, (1999) Seib & Meyer controller

	Pluritec Drills
	Model: Giga 8888	view details » get a quote »
	S/N:
	Available, 8-125k RPM Spindles, (1999-2000)

	Pluritec X-ray Driller
	Model: Inspecta	view details » get a quote »
	S/N:
	Single Head (1997) Sieb & Meyer controller

	Pola e Masa Via Fill Planarization Machine
	Model:	view details » get a quote »
	S/N:
	* Wet Orbital Brush Sanding Unit with 10 brushes (two rows of 5 bushes) * Brushes are off-set to each other and each brush conforms to the local PCB surface * Single Sided Unit or Expandable to Double Sided Sanding Line * Rinsing & Drying modules as well as loaders & unloaders available for expanding to automated line * Ideal for increased sanding demand, including via-fill product, button plated product, resin spot removal after lamination

	Pola e Massa Planarizer
	Model: Type: PLZ-650	view details » get a quote »
	S/N: 113A55.005
	2004

	Posalux Driller
	Model: Ultra 6000	view details » get a quote »
	S/N:
	10 Available CNC 3000 controller 3 Available with 8 heads CALL FOR DETAILS

	Precision Quincy Oven
	Model: 40D-350	view details » get a quote »
	S/N:
	Solder Mask Oven, 48" x 60" x 30" deep

	Printar Legend Printer
	Model: LGP-509	view details » get a quote »
	S/N: M351
	Mfg July 2007 with less than 50 hours use.

	Probot Flying Probe Tester
	Model: Super 6D	view details » get a quote »
	S/N:
	4 probe tester large 24''x 24'' panel size

	Radoll
	Model: Bevelmaster	view details » get a quote »
	S/N:
	Beveling Master

	Radoll
	Model: Bevelmate	view details » get a quote »
	S/N:
	Beveling System

	Radoll
	Model: Edgemate	view details » get a quote »
	S/N:
	Edge finishing unit

	Radoll Scoring Machine
	Model: Score to Break	view details » get a quote »
	S/N:

	Rapid Rectifier
	Model: 500 Amp	view details » get a quote »
	S/N:
	Input 575 volt Output 500 amp 6 volt With controls Air cooled 4 available

	Schmid
	Model: Deburrer	view details » get a quote »
	S/N:
	4 brush deburr w/ high pressure rinse, heated dryer, to be fully rebuilt, stand alone control panel, 24" conveyor, (1991)

	Schmid DES Line
	Model:	view details » get a quote »
	S/N:
	Includes the following: Enter, Preclean, Develop, Rinse Recirculating x 2, Quad Rinse, Inspection, Conveyor Drive, Fresh Rinse, 4 Cupric Chloride Etch, Rinse, Quad Rinse, Inspection, 2 Resist Strip, Post Strip, Rinse Recirculating, Quad Rinse, Dryer, Inspection, Output; 3 mil Transport Capacity

	Schmoll Drilling Machines
	Model: XL6-21	view details » get a quote »
	S/N:
	6 Available, 6-125k RPM Spindles, 535mm x 650mm Work Space, (2001-2002)

	Seiren Ceco Hole Checker
	Model: HC 3W	view details » get a quote »
	S/N: D-159
	- PC controlled - Software included on hard drive - Year: 8/1999

	Sieren Ceco Hole Checker
	Model: HC 3W	view details » get a quote »
	S/N: D-159
	- PC controlled - Software included on hard drive - Year: 8/1999

	Sigma Etching Plate Out Unit
	Model:	view details » get a quote »
	S/N:
	Reduced price. Call us for details

	Somaca Deburrer
	Model: WB 6224J	view details » get a quote »
	S/N:
	24'' Double Sided Deburrer- Oscillation, Rinse, Dryer

	Somaca Scrubber/Rinser/Dryer
	Model: SBC 224K	view details » get a quote »
	S/N:
	24'' Double Sided

	Somaca Scrubber/Rinser/Dryer
	Model: SBC 224L	view details » get a quote »
	S/N:
	24'' Double Sided

	Spencer Vacuum System
	Model: 5hp	view details » get a quote »
	S/N: 303665
	3470 RPM, 200v/3/60hz

	Teknek Tacky Roll Cleaning Machine
	Model: 24"	view details » get a quote »
	S/N:

	Teknek Tacky Roller
	Model:	view details » get a quote »
	S/N:
	Double-sided, w/ numerical counter, anti-static bars, conveyor speed adjustment, variable height, 110 volt, in line application & 27'' rollers

	Teknek Vertical Tacky Roller
	Model: VCM750	view details » get a quote »
	S/N:
	Units like new!

	Teledyne Hot Air Leveler
	Model: HALCO 175	view details » get a quote »
	S/N:
	Horizontal Hot Air Solder Leveler

	Telmec Scoring Machine
	Model: SL 13.9	view details » get a quote »
	S/N:
	Jump Score Capabilities, CNC Controller

	TMP 6 Opening Press
	Model:	view details » get a quote »
	S/N:
	30'' x 30'', With Separate Cool Down, 175 Ton, Chart Recorder

	TMP Hydraulic Press System
	Model: 3-Opening	view details » get a quote »
	S/N:
	24" x 24" Platens, 3 Opening & Built-in water cooling

	TMP Vacuum Press
	Model:	view details » get a quote »
	S/N: 20542
	6 Opening, oil heat, 26 x 36'' Platen Size, Hot & Cold all in one , 2 Zones per Platen, Footprint 9' x 6' x 110'' high great for flex 1997,high temp with oil boiler included turn key system.

	VCM Vertical Developer
	Model:	view details » get a quote »
	S/N:
	- entrance, main chamber, cascade rinse, double dryer, exit - double Penguin pumps - Small footprints

	Wesero Deburrer
	Model: 601	view details » get a quote »
	S/N: M10215
	With Ultrasonics, High Pressure Rinse & Sand Filter

	Wesero Scrubber/Deburrer
	Model: EC600	view details » get a quote »
	S/N: 504
	Bag Filtration With Re-Circulating Rinse. High Pressure Module Option. (2000)

	Western Magnum
	Model: XRL-180	view details » get a quote »
	S/N:
	18" hot roll laminator

	Zinex Rectifier
	Model: 1012FG	view details » get a quote »
	S/N: 043099-13
	Input: 480 VAC 3Phase 30 amps Output: 1000 Amps @ 12 Volts DC This item is used Shipping Dimensions: 35"X36"X50"

Financing Available

Manufacturer: Chemcut

Part Number: 130985

Part Name: S-Wheel, 2" Black

more parts - click here »

Our Latest Equipment List

click here for PDF file »

FM Circuits Plant Closure

inventory/photos »

download list xls »

more liquidations »

Customer Guarantee \| Privacy Policy \| Copyright & Trademark \| Terms & Conditions \| 1-603-881-5253
© 2010 Equipment Technologies, Inc. All Rights Reserved. EquipTech.com is a service mark of Equipment Technologies, Inc.	Web design by: Digital Media Design, Inc.